S700 Joint Angle ShapeSensor™
The S700 ShapeSensor™ is a comfortable, rugged, bipolar joint angle sensor that can withstand a 2 meter drop onto concrete. A covered metal flexure, instrumented with an optical fiber sensor, is mounted adjacent to the joint. It can be used on the knee, arm, or any single degree of freedom joint.

Download S700 Manual (.pdf)

S720 Miniature Joint Angle ShapeSensor™
The S720 ShapeSensor is a comfortable, flexible, joint angle sensor. It can be used to measure the angle of any small 1 degree of freedom joint including fingers, toes, or mechanical parts. Because of its small size, the S720 can be mounted with a reusable, flexible adhesive polymer, which allows easy adjustment to a natural form along the neutral axis of the joint. The polymer may be used either directly on the skin, on a glove or on bio-compatible tape.

Download S720 Manual (.pdf)

S290 12 Bit Data Acquisition System
The S290 series consists of an 8 channel data acquisition module and software.

The S290 is a portable recording module that communicates through your computer’s RS-232 port. It can record data at rates up to 100 samples per second with 12 bits of measurement accuracy.

Download ShapeDAQ Software

ShapeDAQ software for use with ShapeDAQ (ShapeSensor data acquisition device). ShapeDAQ software allows you to record waveforms directly and continuously to disk while monitoring a real time display of the waveforms on your computer screen.